Step 1: Provide your AV1 files using the button above or by toss and let go.
Step 2: Click the 'Convert' button to start the conversion.
Step 3: Fetch your converted JPEG files.
AV1 to JPEG Conversion FAQ
How do I extract individual frames from AV1 as JPEG images?
+
Upload the AV1 file and the converter exposes a frame-extraction picker: every Nth frame, frames at specific timestamps, or one frame per second. Each chosen frame is decoded from the AV1 video stream, encoded as a separate JPEG file, and bundled as a ZIP for download. AV1 is the royalty-free video codec the Alliance for Open Media released in 2018 as the successor to VP9. JPEG is the same standard as JPG and JFIF — the four-letter extension is the original, and the three-letter one exists only because of the DOS 8.3 filename limit.
Will subtitles show up in the JPEG frames I extract?
+
Not if they are a real subtitle track. An AV1 keeps subtitles as their own stream and the player draws them over the picture at playback time, so the decoded frame the converter writes out as a JPEG has clean pixels underneath. Subtitles that were burned into the video before it ever became an AV1 are a different matter — by then they are part of the image and every extracted frame keeps them.
Can I pull one JPEG out of each chapter of the AV1?
+
Not as a single button, but the AV1 makes it straightforward: chapter marks are stored in the container as named timestamps, so read the chapter list off the file and paste those times into the timestamp field. You get one JPEG per chapter, in order, which is the usual way of building thumbnails for a long recording. Sources with no chapter marks leave you picking scenes by eye instead. AV1 delivers roughly 30% better compression than H.264 at the same quality and carries no licence fees, which is why YouTube and Netflix push it.
What quality setting should I use for the JPEG output?
+
Quality 85 is the sensible default and the one used unless you change it — visually indistinguishable from the source at normal viewing distance, at roughly a fifth of the size of a lossless equivalent. Push to 95 for anything that will be edited or printed, and drop to 70 for thumbnails where size dominates. The bitstream is identical to a .jpg: DCT-based lossy compression, usually with 4:2:0 chroma subsampling, wrapped in a JFIF or Exif header.
At what resolution do the extracted JPEG images come out?
+
Same resolution as the source AV1: a 1080p AV1 produces 1920x1080 JPEG frames, a 4K AV1 produces 3840x2160 JPEG frames. The converter does not upscale or downsample — pixel dimensions are pulled straight from the decoded frame. Use /resize-image/ after extraction if you need smaller thumbnails.
Can I extract every frame of an AV1 as JPEG?
+
Yes, but mind the file count — a 30 fps 1-minute AV1 produces 1,800 JPEG frames. We pack them into a single ZIP archive automatically. For longer clips, prefer the "1 per second" preset (60 frames per minute) or pick specific timestamps. An hour of AV1 at every-frame would produce ~100,000 JPEG images.
Will the JPEG frames preserve the AV1 colour grading?
+
Yes — colour is decoded with the same matrix the source AV1 stream advertises (BT.709 for HD, BT.2020 for 4K HDR). HDR sources are tone-mapped to SDR when extracting to a JPEG that cannot store HDR pixel ranges natively (JPG, PNG-8). Target high-bit PNG-16 or TIFF if you need to keep extended dynamic range.
How big is one extracted JPEG frame on disk?
+
Depends on resolution and JPEG codec choice: a 1080p PNG frame is 2-5 MB lossless, a 1080p JPG at quality 85 is 200-500 KB. Multiply by frame count to size the ZIP — at the extreme, every-frame PNG extraction of a 10-minute 1080p AV1 is roughly 50 GB and gets split across multiple ZIPs.
Does the extracted JPEG keep camera EXIF metadata?
+
An AV1 container does not carry per-frame EXIF the way a still camera does, so the JPEG files come out with empty EXIF blocks. The converter does embed a `creation_time` field pointing at the source frame timestamp, so you can re-sort the bundle in chronological order or correlate with subtitle / chapter markers.
How long does frame extraction from AV1 to JPEG take?
+
Frame decoding is fast — typically 20-30% of source duration. A 5-minute AV1 -> JPEG bundle finishes in about 1 minute regardless of how many frames you pick, because the bottleneck is the JPEG encoder writing many small files in parallel, not the AV1 demuxer.
Can I extract frames at exact timestamps inside the AV1 video?
+
Yes — the advanced timestamp option accepts a comma-separated list (e.g. `00:01:23, 00:05:00, 00:10:42.5`) and produces one JPEG file per timestamp. Useful for chapter thumbnails, scene reference shots, or building a contact sheet for review.
Is my AV1 private during frame extraction?
+
Yes — same privacy model as every conversion. Source AV1 and the extracted JPEG bundle are processed in isolated workers and deleted within minutes of completion.
